NETGEAR ProSafe FVS336Gv2 Reference Manual page 236

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Make your selections from the menus and enter the settings.
For more information about the menus and settings, see
page 212.
The following table lists the menus that apply to an IPv4 DMZ WAN outbound rule.
Menus that apply to all IPv4 DMZ WAN outbound
rules
Service
Action
DMZ Users
WAN Users
Log
9. Click the Apply button.
Your settings are saved. The new rule is added to the Outbound Services table on the
DMZ WAN Rules screen.
Add an IPv6 DMZ WAN Outbound Rule
The following procedure describes how to add an IPv64 DMZ WAN outbound rule.

To add an IPv6 DMZ WAN outbound rule:
1. On your computer, launch an Internet browser.
Menus that apply only when your selection from
the Action menu is not BLOCK always
Select Schedule
Note:
from the Action menu includes by schedule.
QoS Profile
NAT IP
Note:
mode is NAT.
Customize Firewall Protection
235
Settings for Outbound Rules
This menu is available only when the selection
This menu is available only when the WAN
on