NETGEAR ProSafe FVS336Gv2 Reference Manual page 607

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Monitoring > Diagnostics.
The Diagnostics screen displays the IPv4 settings.
7. To send a ping to an IPv6 location instead of an IPv4 location, in the upper right, select the
IPv6 radio button.
The Diagnostics screen displays the IPv6 settings. Except for the Domain Name field,
which is the IP Address / Domain Name field on the screen for IPv4, the IPv6 screen is
identical to the IPv4 screen.
8. In the Ping or Trace an IP Address section, in the IP Address / Domain Name field, enter
the IP address or domain name that you want to ping.
Note: On the Diagnostics screen for IPv6, you cannot enter an IP address.
You must enter a domain name in the Domain Name field.
Diagnostics and Troubleshooting
605