NETGEAR ProSafe FVS336Gv2 Reference Manual page 249

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. Under the Inbound Services table, click the Add button.
The Add LAN DMZ Inbound Service screen for IPv4 displays.
8. Make your selections from the menus and enter the settings.
For more information about the menus and settings, see
page 217.
The following table lists the menus that apply to an IPv4 LAN DMZ inbound rule.
Menus that apply to all IPv4 LAN DMZ inbound
rules
Service
Action
LAN Users
DMZ Users
Log
9. Click the Apply button.
Your settings are saved. The new rule is added to the Inbound Services table on the LAN
DMZ Rules screen.
Add an IPv6 LAN DMZ Inbound Rule
The following procedure describes how to add an IPv6 LAN DMZ inbound rule.

To add an IPv6 LAN DMZ inbound rule:
1. On your computer, launch an Internet browser.
Menus that apply only when your selection from
the Action menu is not BLOCK always
Select Schedule
Note:
from the Action menu includes by schedule.
Customize Firewall Protection
248
Settings for Inbound Rules
This menu is available only when the selection
on