Enabling Source Mac Filtering - NETGEAR ProSafe SRXN3205 Reference Manual

ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
Enabling Source MAC Filtering (Address Filter)
In the Address Filter submenu, the Source MAC Filter tab allows you to block traffic coming from
certain known machines or devices.
• By default, the source MAC address filter is disabled. Traffic received from any MAC address
is allowed.
• When source MAC address filtering is enabled, traffic will be dropped from any computers or
devices whose MAC addresses are listed in the Blocked MAC Addresses table.
Note: For additional ways of restricting outbound traffic, see
(Service Blocking)" on page 5-3
To enable MAC filtering and add MAC addresses for blocking:
1. Select Security > Address Filter from the main/submenu.
The Source MAC Filter screen displays.
2. Click the Yes radio button to enable Source MAC Filtering.
3. Select the desired Policy for MAC Addresses listed below.
Block and Permit the rest, or Permit and Block the rest.
5-24 Firewall Security and Content Filtering
v1.0, July 2008
"Outbound Rules