Manage Static Ipv4 Routing; Static Ipv4 Routes - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting
Enable LDAP
information
Advanced Settings
Enable DNS Proxy
8. Click the Apply button.
Your settings are saved.

Manage Static IPv4 Routing

The following sections provide information about managing static IPv4 routing:
•

Static IPv4 Routes

• Add a Static IPv4 Route
• Change a Static IPv4 Route
• Remove One or More Static IPv4 Routes
• Configure the Routing Information Protocol
• IPv4 Static Route Example
Static IPv4 Routes
Static routes provide routing information to your VPN firewall. Under normal circumstances,
the VPN firewall has adequate routing information after it is configured for Internet access,
Description
To enable the DHCP server in the DMZ to provide Lightweight Directory Access
Protocol (LDAP) server information, select the Enable LDAP information check
box. Enter the following settings:
• LDAP Server. The IP address or name of the LDAP server.
• Search Base. The search objects that specify the location in the directory
tree from which the LDAP search begins. You can specify multiple search
objects, separated by commas. The search objects include the following:
- CN (for common name)
- OU (for organizational unit)
- O (for organization)
- C (for country)
- DC (for domain)
For example, to search the netgear.net domain for all last names of Johnson,
enter the following objects:
cn=Johnson,dc=Netgear,dc=net
• Port. The port number for the LDAP server. The default setting is 0 (zero).
This setting is optional. To enable the VPN firewall to provide a DMZ IP address
for DNS address name resolution, select the Enable DNS Proxy check box. This
check box is selected by default.
Note: If you clear the Enable DNS Proxy check box for the DMZ, all computers
in the DMZ receive the DNS IP addresses of the ISP but without the DNS proxy IP
address.
Configure the IPv4 LAN Settings
144