NETGEAR ProSafe FVS336Gv2 Reference Manual page 491

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
• Remove One or More Authentication Domains
Authentication Domains Overview
An authentication domain specifies the authentication method for users that are assigned to
the domain. For SSL connections, the domain also determines the portal layout that is
presented, which in turn determines the network resources to which the associated users
have access. The default domain of the VPN firewall is named geardomain. You cannot
change or remove the default domain.
Add an Authentication Domain
The following procedure describes how to add a new authentication domain.

To add an authentication domain:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Users > Domains.
The Domains screen displays. The following figure shows the VPN firewall's default
domain—geardomain—and, as an example, other domains in the List of Domains table.
Manage Users, Authentication, and VPN Certificates
489