Add Dmz Wan Inbound Service Rules - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
9. Make your selections from the menus and enter the settings.
For more information about the menus and settings, see
page 212.
The following table lists the menus that apply to an IPv6 DMZ WAN outbound rule.
Menus that apply to all IPv6 DMZ WAN outbound
rules
Service
Action
DMZ Users
WAN Users
Log
10. Click the Apply button.
Your settings are saved. The new rule is added to the Outbound Services table on the
DMZ WAN Rules screen.

Add DMZ WAN Inbound Service Rules

For DMZ WAN traffic, the default inbound policy is to block all traffic from the Internet.
You can change the default policy by adding DMZ WAN firewall rules that allow specific types
of traffic to come in from the Internet to the DMZ (inbound). You can allow access based on
the service or application, source or destination IP addresses, and time of day.
Menus that apply only when your selection from
the Action menu is not BLOCK always
Select Schedule
Note:
from the Action menu includes by schedule.
QoS Priority
Customize Firewall Protection
237
Settings for Outbound Rules
This menu is available only when the selection
on