NETGEAR ProSafe FVS336Gv2 Reference Manual page 161

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
b. In the upper right, select the IPv6 radio button.
The WAN Setup screen displays the IPv6 settings.
c. In the WAN IPv6 Settings table, click the Edit button for the WAN interface for which
you want to check the WAN configuration.
The WAN IPv6 ISP Settings screen displays. The following figure shows the WAN2
IPv6 ISP Settings screen as an example.
d. In the Internet Address section, make sure that the selection from the IPv6 menu is
DHCPv6.
e. In the DHCPv6 section, make sure that the Stateless Address Auto Configuration
radio button is selected.
Configure the IPv6 LAN Settings
160