NETGEAR ProSafe FVS336Gv2 Reference Manual page 526

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Remove One or More Certificate Revocation Lists
The following procedure describes how to remove one or more Certificate Revocation Lists
(CRLs) that you no longer need.

To remove one or more CRLs:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select VPN > Certificates.
The Certificates screen displays.
7. In the Certificate Revocation Lists (CRL) table, select the check box to the left of each CRL
that you want to remove or click the Select All button to select all CRLs.
8. Click the Delete button.
The selected CRLs are removed from the Certificate Revocation Lists (CRL) table.
Self-Signed Certificates and Security Alerts
A self-signed digital certificate triggers a warning from most browsers because the certificate
provides no protection against identity theft of a server. The following figure shows an image
of a browser security alert.
Manage Users, Authentication, and VPN Certificates
524