NETGEAR ProSafe FVS336Gv2 Reference Manual page 359

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
7. Specify the settings that are described in the following table.
Setting
Advanced features
Aggressive Mode
NAT-T
Local and Remote ID
Local ID
Remote ID
8. Click the Save button.
Set Up Virtual Private Networking With IPSec Connections
Description
Select this check box to enable aggressive mode as the mode of negotiation with
the VPN firewall.
From the menu, select Automatic.
The VPN client and VPN firewall can now negotiate NAT-T.
As the type of ID, select DNS from the Local ID menu because you specified
FQDN in the VPN firewall configuration.
As the value of the ID, enter remote.com as the local ID for the VPN client.
Note: The remote ID on the VPN firewall is the local ID on the VPN client. It might
be less confusing to configure an FQDN such as client.com as the remote ID on
the VPN firewall and then enter client.com as the local ID on the VPN client.
As the type of ID, select DNS from the Remote ID menu because you specified
an FQDN in the VPN firewall configuration.
As the value of the ID, enter local.com as the remote ID for the VPN firewall.
Note: The local ID on the VPN firewall is the remote ID on the VPN client. It might
be less confusing to configure an FQDN such as router.com as the local ID on the
VPN firewall and then enter router.com as the remote ID on the VPN client.
357