View The System Status - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
• View the VPN Connection Status, L2TP Users, and PPTP Users
• View the VPN Logs
• View the Port Triggering Status
• View the WAN Port Status and Terminate or Establish the Internet Connection
• Display Internet Traffic by Type of Traffic
• View the Attached Devices
• View the DHCP Log

View the System Status

You can view real-time information about the following important components of the VPN
firewall:
• Firmware version
• Both IPv4 and IPv6 WAN and LAN port information
• Interface statistics
• VLAN status, including port memberships
• IPv6 tunnels
The following sections provide information about viewing the system status:
• Display an Overview of the VPN Firewall Addresses and Firmware Version
• View the Traffic Statistics for the Interfaces and Change the Polling Interval
• View Detailed Status Information About the VPN Firewall
• View the VLAN Status
• View the IPv6 Tunnel Status
Display an Overview of the VPN Firewall Addresses and Firmware Version
The following procedure describes how to display an overview of the LAN and WAN IPv4 and
IPv6 addresses and firmware version.

To view the addresses and firmware version:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter 10.0.0.2 if you log in from the WAN or enter
192.168.20.0 if you log in from the LAN.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
Monitor System Access and Performance
582