NETGEAR ProSafe FVS336Gv2 Reference Manual page 158

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Enter the settings as described in the following table.
Setting
IPv6 LAN Setup
IPv6 Address
IPv6 Prefix Length
DHCPv6
DHCP Status
DHCP Mode
Description
Enter the LAN IPv6 address. The default address is fc00::1. (For more information,
see IPv6 LANs on page 153.)
Enter the IPv6 prefix length, for example, 10 or 64. The default prefix length is 64.
Enable the DHCPv6 server by selecting Enable DHCPv6 Server from the DHCP
Status menu.
The default menu selection is Disable DHCPv6 Server.
From the DHCP Mode menu, select Stateless.
The IPv6 clients generate their own IP address by using a combination of locally
available information and router advertisements but receive DNS server information
from the DHCPv6 server.
When you enable the stateless DHCP server for the LAN, you must also enable and
configure the RADVD for the LAN. For more information, see
Router Advertisement Daemon for the LAN
Configure the IPv6 LAN Settings
157
Manage the IPv6
on page 171.