NETGEAR ProSafe FVS336Gv2 Reference Manual page 328

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The Port Triggering screen displays. The following figure shows a rule in the Port
Triggering Rules table as an example.
7. In the Add Port Triggering Rule section, enter the settings as described in the following
table.
Setting
Name
Enable
Protocol
Outgoing Ports
Incoming Ports
8. Click the Add button.
Your settings are saved and the new port triggering rule is added to the Port Triggering
Rules table.
Description
A descriptive name of the rule for identification and management purposes.
From the menu, select Yes to enable the rule.
You can define a rule but keep it disabled it by selecting No from the menu.
From the menu, select the protocol to which the rule applies:
• TCP. The rule applies to an application that uses the Transmission Control
Protocol (TCP).
• UDP. The rule applies to an application that uses the User Datagram Protocol
(UDP).
Specify the outgoing ports:
• Start Port. The start port (1025–65535) of the range for triggering.
• End Port. The end port (1025–65535) of the range for triggering.
Specify the incoming ports:
• Start Port. The start port (1025–65535) of the range for triggering.
• End Port. The end port (1025–65535) of the range for triggering.
Protect Your Network
327