NETGEAR ProSafe FVS336Gv2 Reference Manual page 77

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting
Congestion Priority
Hosts
Outbound Minimum
Bandwidth
Outbound Maximum
Bandwidth
Inbound Minimum
Bandwidth
Inbound Maximum
Bandwidth
Diffserv QoS Remark
9. Click the Apply button.
Your settings are saved. The profile is added to the List of QoS Profiles table on the QoS
screen.
You are now ready to enable WAN QoS and select the rate control QoS type (see
WAN QoS and Select the WAN QoS Type
Description
From the menu, select the priority queue that determines the allocation of
excess bandwidth and the classification level of the packets among other
priority queues on the VPN firewall:
• Default. Traffic is mapped based on the ToS field in the packet's IP header.
• High. This queue includes the following DSCP values: AF41, AF42, AF43,
AF44, and CS4.
• Medium-high. This queue includes the following DSCP values: AF31,
AF32, AF33, AF34, and CS3.
• Medium. This queue includes the following DSCP values: AF21, AF22,
AF23, AF24, and CS2.
• Low. This queue includes the following DSCP values: AF11, AF12, AF13,
AF14, CS1, 0, and all other values.
From the menu, select the IP address, range of IP addresses, or group to which
the profile is applied, and, if applicable, specify how the bandwidth is allocated:
• Single IP Address. The profile is applied to a single IP address. Enter the
address in the Start IP field.
• IP Address Range. The profile is applied to an IP address range. Enter the
first address of the range in the Start IP field and the last address of the
range in the End IP field. From the Bandwidth Allocation menu, select
how the bandwidth is allocated:
- Shared. The bandwidth is shared among all IP addresses the range.
- Individual. The bandwidth is allocated to each IP address in the range.
• Group. The profile is applied to a LAN group. From the Select Group
menu, select the LAN group to which the profile is applied. For information
about LAN groups, see
From the Bandwidth Allocation menu, select how the bandwidth is
allocated:
- Shared. The bandwidth is shared among all members of a group.
- Individual. The bandwidth is allocated to each member of a group.
Enter the minimum outbound bandwidth in Kbps that is allocated to the host.
Enter the maximum outbound bandwidth in Kbps that is allocated to the host.
Enter the minimum inbound bandwidth in Kbps that is allocated to the host.
Enter the maximum inbound bandwidth in Kbps that is allocated to the host.
Enter a DSCP value in the range of 0 through 63. Packets are marked with this
value. Leave this field blank to disable packet marking.
Configure the IPv4 Internet and WAN Settings
77
Manage IPv4 LAN Groups and Hosts
on page 80).
on page 132.
Enable