NETGEAR ProSafe FVS336Gv2 Reference Manual page 257

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8. Enter the settings as described in the following table.
Setting
Service
Action
Select Schedule
Send to LAN Server
WAN Destination IP
Address
WAN Users
QoS Profile
Description
From the menu, select CU-SEEME:UDP.
From the menu, select ALLOW by schedule, otherwise block.
(If you do not want to use a schedule, select ALLOW always.)
From the menu, select a schedule.
For information about how to configure schedules, see
page 292.
From the menu, select Single address.
In the Start field, enter the LAN IP address of the server that receives the video
traffic.
The setting that determines the destination IP address applicable to incoming traffic.
This is the public IP address that maps to the internal server on the LAN that
receives the video traffic.
From the menu, select the WAN interface that you want to use.
From the menu, select Address Range.
In the Start and Finish fields, specify the WAN address range from which the VPN
firewall accepts video traffic.
You can leave the selection from the menu at None.
Customize Firewall Protection
256
Define a Schedule on