Dhcp Logs - NETGEAR ProSafe FVS336Gv2 Reference Manual

Prosafe dual wan gigabit ssl vpn firewall

Hide thumbs Also See for ProSafe FVS336Gv2:

Table of Contents

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

DHCP Logs

This section explains the log messages that are generated when a host is assigned a

dynamic IP address. These messages are displayed on the DHCP Log screen (see

on page 601).

Table 50. DHCP logs

Recommended action

2000 Jan 1 07:27:28 [FVS336Gv2] [dhcpd] Listening on

LPF/eth0.1/00:11:22:78:89:90/192.168.11/24

2000 Jan 1 07:27:37 [FVS336Gv2] [dhcpd] DHCPRELEASE of 192.168.10.2 from

00:0f:1f:8f:7c:4a via eth0.1 (not found)

2000 Jan 1 07:27:47 [FVS336Gv2] [dhcpd] DHCPDISCOVER from

00:0f:1f:8f:7c:4a via eth0.1

2000 Jan 1 07:27:48 [FVS336Gv2] [dhcpd] DHCPOFFER on 192.168.11.2 to

00:0f:1f:8f:7c:4a via eth0.1

2000 Jan 1 07:27:48 [FVS336Gv2] [dhcpd] Wrote 2 leases to leases file.

2000 Jan 1 07:27:48 [FVS336Gv2] [dhcpd] DHCPREQUEST for 192.168.11.2

(192.168.11.1) from 00:0f:1f:8f:7c:4a via eth0.1

2000 Jan 1 07:27:48 [FVS336Gv2] [dhcpd] DHCPACK on 192.168.11.2 to

00:0f:1f:8f:7c:4a via eth0.1

Message 1: The DHCP server is listening on eth0.1.

Message 2: Release of the currently assigned IP address from the host by the

DHCP server.

Message 3: DHCP broadcast by the host is discovered by the DHCP server.

Message 4: The DHCP server offers a new IP address to the host's current network

Message 5: Two new leases are written to the lease file.

Message 6: DHCP is requested to assign the new IP address by the host.

Message 7: DHCP acknowledgment to the current network interface from the

server on assignment of the new IP address.

System Logs and Error Messages