Change A Static Ipv6 Route - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting
Interface
IPv6 Gateway
Metric
10. Click the Apply button.
Your settings are saved. The new static route is added to the List of IPv6 Static Routes
table on the Static Routing screen for IPv6.

Change a Static IPv6 Route

The following procedure describes how to change an existing IPv6 static route.

To change an IPv6 static route:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > Routing.
The Static Routing screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button.
The Static Routing screen displays the IPv6 settings.
8. In the List of IPv6 Static Routes table, click the Edit button for the route that you want to
change.
Description
From the menu, select the physical or virtual network interface (the WAN1 or
WAN2 interface, a sit0 Tunnel, LAN interface, or DMZ interface) through which the
route is accessible.
The gateway IPv6 address through which the destination host or network can be
reached.
The priority of the route. Select a value between 2 and 15. If multiple routes to the
same destination exist, the route with the lowest metric is used.
Configure the IPv6 LAN Settings
206