NETGEAR ProSafe FVS336Gv2 Reference Manual page 546

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
• Access Type. Read-write user (RWUSER) or read-only user (ROUSER). By default,
the user Admin is an RWUSER and the user guest is an ROUSER.
• Security Level. The level of security that indicates whether security is disabled:
- NoAuthNoPriv. Both authentication and privacy are disabled.
- AuthNoPriv. Authentication is enabled but privacy is disabled.
- AuthPriv. Both authentication and privacy are enabled.
7. In the SNMPv3 User table, to the right of the SNMPv3 user for which you want to change
the settings, click the corresponding Edit button.
The Edit User screen displays.
8. Enter the settings as described in the following table.
Setting
Username
Access Type
Security Level
Authentication Algorithm
Description
The default user name (admin or guest) for information only.
The default access type (RWUSER or ROUSER) for information only.
From the menu, select the security level for communication between the
SNMPv3 user and the SNMP agent that collects the MIB objects from the VPN
firewall:
• NoAuthNoPriv. Both authentication and privacy are disabled. This is the
default setting.
• AuthNoPriv. Authentication is enabled but privacy is disabled. Make a
selection from the Authentication Algorithm menu and enter an
authentication password.
• AuthPriv. Authentication and privacy are enabled. Make a selection from
the Authentication Algorithm menu and enter an authentication
password. In addition, make a selection from the Privacy Algorithm menu
and enter a privacy password.
From the menu, select the protocol for authenticating an SNMPv3 user:
• MD5. Message Digest 5. This is a hash algorithm that produces a 128-bit
digest.
• SHA1. Secure Hash Algorithm 1. This is a hash algorithm that produces a
160-bit digest.
Optimize Performance and Manage Your System
544