Remove One Or More Secondary Lan Ipv6 Addresses - NETGEAR ProSafe FVS336Gv2 Reference Manual
Prosafe dual wan gigabit ssl vpn firewall
Hide thumbs
Also See for ProSafe FVS336Gv2:
- Installation manual (2 pages) ,
- Reference manual (203 pages) ,
- Datasheet (3 pages)
Table of Contents
Advertisement
ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
8.
In the Available Secondary LAN IPs table, click the Edit button for the secondary IP address
that you want to change.
The Edit LAN Multi-homing screen displays.
9.
Modify the IP address or prefix length, or both:
•
IPv6 Address. Modify the secondary address that is assigned to the LAN ports.
•
Prefix Length. Modify the prefix length for the secondary IP address.
10.
Click the Apply button.
Your settings are saved. The modified secondary IP address displays in the Available
Secondary LAN IPs table on the LAN Multi-homing screen.
Remove One or More Secondary LAN IPv6 Addresses
The following procedure describes how to remove one or more existing secondary LAN IPv6
addresses that you no longer need.
To remove one or more secondary LAN IPv6 addresses:
1.
On your computer, launch an Internet browser.
2.
In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3.
In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4.
If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5.
Click the Login button.
The Router Status screen displays.
6.
Select Network Configuration > LAN Settings > LAN Multi-homing.
The LAN Multi-homing screen displays the IPv4 settings.
7.
In the upper right, select the IPv6 radio button.
The LAN Multi-homing screen displays the IPv6 settings.
8.
In the Available Secondary LAN IPs table, select the check box to the left of each
secondary IP address that you want to remove or click the Select All button to select all
secondary IP addresses.
Configure the IPv6 LAN Settings
183
Advertisement
Table of Contents
Troubleshooting
