Change Group Names In The Network Database - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2

Change Group Names in the Network Database

By default, the groups are named Group1 through Group8. You can change these group
names to be more descriptive, for example, GlobalMarketing and GlobalSales.

To change the name of one of the eight available groups:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > LAN Settings > LAN Groups.
The LAN Groups screen displays. The following figure shows some manually added
devices in the Known PCs and Devices table as an example.
7. Click the Edit Group Names option arrow.
The following figure shows some examples.
Configure the IPv4 LAN Settings
139