NETGEAR ProSafe FVS336Gv2 Reference Manual page 92

Prosafe dual wan gigabit ssl vpn firewall
Hide thumbs Also See for ProSafe FVS336Gv2:
Table of Contents

Advertisement

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Status. The status of the WAN interface (UP or DOWN).
WAN IP. The IPv6 address of the WAN interface.
Action. The Edit button provides access to the WAN IPv6 ISP Settings screen (see
Step
8) for the corresponding WAN interface; the Status button provides access to
the Connection Status screen (see
8.
In the IPv6 WAN Settings table, click the Edit button for the WAN interface for which you
want to let the VPN firewall automatically configure the connection to the Internet.
The WAN IPv6 ISP Settings screen displays. The following figure shows the WAN2 IPv6
ISP Settings screen as an example.
9.
In the Internet Address section, from the IPv6 menu, select DHCPv6.
10.
In the DHCPv6 section, select a radio button:
Stateless Address Auto Configuration. The VPN firewall generates its own IP
address by using a combination of locally available information and router
advertisements but receives DNS server information from the ISP DHCPv6 server.
Stateful Address Auto Configuration. The VPN firewall obtains an interface
address, configuration information such as DNS server information, and other
parameters from the ISP DHCPv6 server. The IP address is a dynamic address.
11.
If you selected the Stateless Address Auto Configuration radio button, you can select the
Prefix Delegation check box as described below:
Step
Configure the IPv6 Internet and WAN Settings
92
13) for the corresponding WAN interface.

Advertisement

Table of Contents
loading

Table of Contents