Manage User Accounts - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
For a group that you created manually, if the group has users assigned to it, you first must
assign the users to another group; otherwise, you cannot remove the group (see
User Account on page 502).
Note: You cannot remove the default group geardomain.

To remove one or more authentication groups:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Users > Groups.
The Groups screen displays.
7. In the List of Groups table, select the check box to the left of each group that you want to
remove or click the Select All button to select all groups.
8. Click the Delete button.
The selected groups are removed from the List of Groups table.

Manage User Accounts

The following sections provide information about managing user accounts:
• User Accounts Overview
• Add a User Account
• Change a User Account
• Remove One or More User Accounts
Manage Users, Authentication, and VPN Certificates
498
Change a