NETGEAR ProSafe FVS336Gv2 Reference Manual page 197

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > DMZ Setup.
The DMZ Setup screen displays the IPv4 settings.
7. In the upper right, select the IPv6 radio button.
The DMZ Setup screen displays the IPv6 settings.
8. Click the RADVD option arrow in the upper right.
The RADVD screen for the DMZ displays.
9. In the List of Prefixes to Advertise table, click the Edit button for the advertisement prefix that
you want to change.
The Edit Advertisement Prefix screen displays.
10. Change the settings.
For information about the settings, see
page 192.
11. Click the Apply button.
Your settings are saved. The modified advertisement prefix displays in the List of Prefixes
to Advertise table on the RADVD screen for the DMZ.
Remove One or More Advertisement Prefixes for the DMZ
The following procedure describes how to remove one or more advertisement prefixes that
you no longer need for the DMZ.

To remove one or more advertisement prefixes for the DMZ:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
Add an Advertisement Prefix for the DMZ
Configure the IPv6 LAN Settings
196
on