Traffic Meter Logs; Routing Logs - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Table 38. System logs: VPN log messages, port forwarding, LAN host and interface
Message
Explanation
Recommended action

Traffic Meter Logs

Table 39. System logs: traffic meter
Message
Explanation
Recommended action

Routing Logs

The following sections provide information about routing log messages:
• LAN to WAN Logs
• LAN to DMZ Logs
• DMZ to WAN Logs
• WAN to LAN Logs
• DMZ to LAN Logs
• WAN to DMZ Logs
These sections explain the logging messages for the various network segments (such as
LAN to WAN) for debugging purposes. These logs might generate a significant volume of
messages.
2000 Jan 1 01:35:41 [FVS336Gv2] [portforwarding]
id=FVS336Gv2 time="2000-1-1 1:35:41" fw=192.168.11.1 pri=6 rule=access-policy
proto="Virtual Transport (Java)" src=192.168.11.2 user=sai dst=192.168.11.1 arg=
"" op="" result="" rcvd="" msg="Virtual Transport (Java)"
An SSL VPN tunnel through port forwarding is established for ID FVS336Gv2 from
the LAN host 192.168.11.2 with interface 192.168.11.1 and logged in with the user
name "sai."
None
Jan 23 19:03:44 [TRAFFIC_METER] TRAFFIC_METER: Monthly Limit of 10 MB
has reached for WAN1._
Traffic limit to WAN1 that was set as 10 Mb is reached.
This stops all the incoming and outgoing traffic, that is, if you selected the Block All
Traffic radio button in the When Limit is Reached section on the WAN TrafficMeter
screen.
To start the traffic, restart the traffic limit counter.
System Logs and Error Messages
656