Configure Netbios Bridging With Ipsec Vpn - NETGEAR ProSafe FVS336Gv2 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
The VPN Policies screen displays the IPv6 settings.
c. In the List of VPN policies table, select the VPN policy that is associated with the
IKE policy that you changed.
d. Click the Enable button.
The VPN policy is reenabled. The gray circle to the left of the VPN policy turns green.

Configure NetBIOS Bridging with IPSec VPN

Windows networks use the Network Basic Input/Output System (NetBIOS) for several basic
network services such as naming and neighborhood device discovery. Because VPN routers
do not usually pass NetBIOS traffic, these network services do not function for hosts on
opposite ends of a VPN connection. To solve this problem, you can configure the VPN
firewall to bridge NetBIOS traffic over the VPN tunnel.

To enable NetBIOS bridging on an existing VPN tunnel:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select VPN > IPSec VPN > VPN Policies.
The VPN Policies screen displays the IPv4 settings.
7. To change a VPN policy for IPv6 instead of IPv4, in the upper right, select the IPv6 radio
button.
The VPN Policies screen displays the IPv6 settings.
8. In the List of VPN Policies table, click the Edit button for the VPN policy that you want to
change.
Set Up Virtual Private Networking With IPSec Connections
416