NETGEAR ProSafe FVS336Gv2 Reference Manual page 355

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv2
Setting
Local and Remote ID
Local ID
Remote ID
9. Configure the global parameters:
a. In the tree list pane of the Configuration Panel screen, click Global Parameters.
b. Specify the default lifetimes in seconds:
• Authentication (IKE), Default. The default lifetime value is 3600 seconds.
Change this setting to 28800 seconds to match the configuration of the VPN
firewall.
• Encryption (IPSec), Default. The default lifetime value is 1200 seconds. Change
this setting to 3600 seconds to match the configuration of the VPN firewall.
Set Up Virtual Private Networking With IPSec Connections
Description
As the type of ID, select DNS from the Local ID menu because you specified
FQDN in the VPN firewall configuration.
As the value of the ID, enter remote.com as the local ID for the VPN client.
Note: The remote ID on the VPN firewall is the local ID on the VPN client. It
might be less confusing to configure an FQDN such as client.com as the
remote ID on the VPN firewall and then enter client.com as the local ID on the
VPN client.
As the type of ID, select DNS from the Remote ID menu because you
specified an FQDN in the VPN firewall configuration.
As the value of the ID, enter local.com as the remote ID for the VPN firewall.
Note: The local ID on the VPN firewall is the remote ID on the VPN client. It
might be less confusing to configure an FQDN such as router.com as the local
ID on the VPN firewall and then enter router.com as the remote ID on the VPN
client.
353