Create Lan Wan Inbound Service Rules - NETGEAR ProSafe FVS318N Reference Manual

IPv6 LAN WAN Outbound Rules

To create a new IPv6 LAN WAN outbound rule:
1. In the upper right of the LAN WAN Rules screen, select the IPv6 radio button. The screen
displays the IPv6 settings (see
2. Click the Add table button under the Outbound Services table. The Add LAN WAN
Outbound Service screen for IPv6 displays:
Figure 64.
3. Enter the settings as explained in
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
• LAN Users
• WAN Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make a selection from the following drop-down lists:
• Select Schedule
• QoS Priority
4. Click Apply to save your changes. The new rule is now added to the Outbound Services
table.

Create LAN WAN Inbound Service Rules

The Inbound Services table lists all existing rules for inbound traffic. If you have not defined
any rules, no rules are listed. By default, all inbound traffic (from the Internet to the LAN) is
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 62
Table 32
Firewall Protection
on page 136).
on page 128. In addition to selections from the
139