Creating A Lan Wan Inbound Services Rule - NETGEAR ProSafe SRXN3205 Reference Manual

3. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed on the Outbound Services table.

Creating a LAN WAN Inbound Services Rule

This Inbound Services Rules table lists all existing rules for inbound traffic. If you have not
defined any rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that
allowing inbound services opens holes in your firewall. Only enable those ports that are necessary
for your network.
To create a new inbound service rule in the LAN WAN Rules tab:
1. Click Add under the Inbound Services Table. The Add LAN WAN Inbound Service screen is
displayed.
Figure 5-3Need news creenshot
2. Configure the parameters based on the descriptions in
3. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed on the Inbound Services table.
Modifying Rules
To make changes to an existing outbound or inbound service rule:
Firewall Security and Content Filtering
ProSafe Wireless-N VPN Firewall SRXN3205 Reference Manual
v1.0, July 2008
Table 5-2 on page 5-5.
5-9