Lan Wan Outbound Services Rules; Lan Wan Inbound Services Rules - NETGEAR ProSafe Quad WAN FR538G Reference Manual

LAN WAN Outbound Services Rules

You may define rules that will specify exceptions to the default rules. By adding custom rules, you
can block or allow access based on the service or application, source or destination IP addresses,
and time of day. The outbound rule will block the selected application from any internal IP LAN
address to any external WAN IP address according to the schedule created in the Schedule menu.
You can also tailor these rules to your specific needs (see
Note: This feature is for Advanced Administrators only! Incorrect configuration will
cause serious problems.
To create a new outbound service rule:
1. Click Add under the Outbound Services Table. The Add LAN WAN Outbound Service
screen will display.
..
Figure 4-3
2. Complete the Outbound Service screen, and save the data (see
3. Click Reset to cancel your settings and return to the previous settings.
4. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed on the Outbound Services table.

LAN WAN Inbound Services Rules

This Inbound Services Rules table lists all existing rules for inbound traffic. If you have not
defined any rules, no rules will be listed. By default, all inbound traffic is blocked. Remember that
Firewall Protection and Content Filtering
ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
v1.0, November 2007
"Administrator Tips" on page
Table 4-1 on page
4-38).
4-3).
4-9