Specifying Settings To Limit The Use Of Communication Modes- 3/Specifying Restrictions For Registering Fax Addresses And Printing Reports And Specifying How One-Touch Dial Recipients Are Displayed (Mode 477) - Konica Minolta bizhub 362 User Manual

11
Specifying settings to limit the use of communication modes–
3/Specifying restrictions for registering fax addresses and printing
reports and specifying how one-touch dial recipients are displayed
(mode 477)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
Specify whether or not fax addresses can be registered and reports can be
printed by users, and specify whether or not one-touch dial information is
displayed in screens and reports.
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not
normally be displayed.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side indicate the page numbers with
descriptions for the corresponding function.
Bit
7
6
11-100
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specifies whether or 0
not the use of the
1
computer (scanner)
is prohibited.
Specifies whether 0
settings for register-
ing fax addresses or
1
printing reports can
be specified by only
the administrator or
also by the user.
Description
Permitted
Prohibited
Settings can also be
specified by users.
Settings can only be
specified in Administrator
mode.
bizhub 362/282/222
Utility mode
Page Refer-
ence
----------
p. 11-50