Specifying Settings To Limit The Use Of Communication Modes-3/ Specifying Restrictions For Registering Fax Addresses And Printing Reports And Specifying How One-Touch Dial Recipients Are Displayed (Mode 477) - Konica Minolta bizhub 362 User Manual

Specifying management settings
Specifying settings to limit the use of communication modes-3/
Specifying restrictions for registering fax addresses and printing
reports and specifying how one-touch dial recipients are displayed
(mode 477)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
Specify whether or not fax addresses can be registered and reports can be
printed by users, and specify whether or not one-touch dial information is
displayed in screens and reports.
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not
normally be displayed.
Factory settings
Bit
Setting
bizhub 362/282/222
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
10
10-57