Config Wac Authorization Attributes - D-Link xStack DGS-3120 Series Cli Reference Manual

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
DGS-3120-24TC:admin# config wac user Jim vlanid 3
Command: config wac user Jim vlanid 3
Enter a old password: ***
Enter a case-sensitive new password: ***
Enter the new password again for confirmation: ***
Success.
DGS-3120-24TC:admin#
120-12

config wac authorization attributes

Description
This command is used to enable or disable the acceptation of authorized configuration. When the
authorization is enabled for WAC's radius, the authorized data assigned by the RADUIS server will
be accepted if the global authorization network is enabled. When the authorization is enabled for
WAC's local, the authorized data assigned by the local database will be accepted.
Format
config wac authorization attributes {radius [enable| disable] | local [enable | disable]}(1)
Parameters
radius - (Optional) If specified to enable, the authorized data assigned by the RADUIS server will
be accepted if the global authorization network is enabled. The default state is enabled.
enable - Specify that the authorized data assigned by the RADUIS server will be accepted.
disable - Specify that the authorized data assigned by the RADUIS server will not be
accepted.
local - (Optional) If specified to enable, the authorized data assigned by the local database will
be accepted if the global authorization network is enabled. The default state is enabled.
enable - Specify that the authorized data assigned by the local database will be accepted.
disable - Specify that the authorized data assigned by the local database will not be accepted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable acceptation of authorized configuration:
DGS-3120-24TC:admin# config wac authorization attributes local disable
Command: config wac authorization attributes local disable
Success.
DGS-3120-24TC:admin#
1100