Save Translations - Avaya CMC1 Installation Manual

Installing and Cabling the Cabinets
Activate and Administer the System
•
It is not necessary to fill in the Circuit Packs form if the circuit packs are installed at the time of
administration.
•
For initial installation, assign circuit packs to slots using the hardware configuration layout record
from the factory or Customer Services Organization. Do not arbitrarily assign circuit packs to
slots.
•
When a circuit pack in a slot differs from what has been administered on the form, a "#" displays
between the "Sfx" and "Name" fields.
Set System Maintenance Parameters
CAUTION:
To prevent unnecessary trouble tickets, do not enable the system alarms (Alarm
Origination feature) until all installation and administration procedures are completed.
1
Enter change system-parameters maintenance and press Enter.
2
Enter the alarm notification and scheduled maintenance information into each field on Page 1 of
the form.
3
Enter the appropriate information on Page 2 of the form.
4
Press Enter when finished.
Administer the Attendant Console
If no attendant console is installed, proceed to
1
Enter display system-parameters country-options and press Enter. Verify the system's
companding mode for its local stations (usually, A-Law for Europe and mu-Law for North
America and Japan).
2
If necessary, enter change terminal-parameters 603/302B1 to change the default system-level
parameters and audio levels for these terminals.
NOTE:
For information about changing the default parameters and audio levels, refer to
DEFINITY Application Notes available through the ITAC (International Technical
Assistance Center).
3
Administer other forms listed under "Attendant Console" in Administrator's Guide for Avaya
Communication Manager.
To administer an Avaya SoftConsole, see Administrator's Guide for Avaya Communication Manager.

Save Translations

1
Enter save translation and press Enter. This copies the current system translations onto the
translation card and takes about 10 minutes.
2
Remove the original translation card and replace with the backup card.
3
Repeat Step 1 for the backup translation card.
4
Remove the backup card and replace with the original translation card.
5
Label the backup card with the date and time of the backup and store in a secure place.
74
Save
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
Translations.
June 2004