Connecting A Pc - Avaya CMC1 Installation Manual

Installing and Cabling the Cabinets
Set Up System Access
1
On the services laptop open a VT-100 terminal emulation session using an application such as
Avaya Terminal Emulation.
2
Administer the terminal emulation port settings:
•
9600 baud
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
3
Log into the media server as craft or dadmin.

Connecting a PC

You can connect your PC/laptop either directly (50 ft [15 m] or less) or remotely through a data module
or a modem.
Direct connection
You can connect directly from the PC if it is 50 ft (15 m) or less from the Avaya CMC1 Media Gateway.
1
Connect the equipment as shown in
CAUTION:
For a DC-powered system, install an EIA 116A Isolator (comcode 106005242) in series
between the cable and the TERM, DOT, or Terminal Active connector.
Figure 24: A typical direct connection
Figure notes
1 Avaya CMC1 Media Gateway
(PPN)
2 50-ft (15-m) M25A cable (RS-
232)
60
Figure
1
cydfdr23 KLC 090700
3
4
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
24.
4
3
2
9-to-25 pin adapter if needed
Computer with Avaya Integrated
Management
June 2004