Avaya CMC1 Installation Manual page 76

Installing and Cabling the Cabinets
Install and Wire Telephones and Trunks
Figure 32: 302D to Digital Line Circuit Pack Wiring
Figure notes
1 302D attendant console
2 4-wire digital line circuit pack
4
Install cross-connect jumpers to wire the terminal to the port circuit pack. See
pinout is for a 4-wire Digital Line circuit pack.
Analog Station or 2-Wire Digital Station
Example
This example is typical of the 2-wire digital stations,2-wire analog stations, analog CO trunks, DID
trunks, and external alarms. See
Figure 33: 2500-Type Analog Telephone Wiring
Figure notes
1 2500-type analog station
1
Choose a peripheral to connect (such as a 2-wire digital station).
2
Choose the port circuit pack to use and its carrier and slot number. For example, TN2183 Analog
Line, Cabinet 1, Carrier C, Slot 1.
3
Choose a port circuit on the port circuit pack, for example port 3.
4
Install cross-connect jumpers to connect the pins from the 2-wire station to the appropriate pins
on the port circuit pack.
5
Administer using Administrator's Guide for Avaya Communication Manager.
76
TXT 1
TXR 2
PXT 3
PXR
6
7
8
3
4
Figure 33.
T 2
R 3
2
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
39 TXT5
14 TXR5
40
PXT5
15 PXR5
302cwire RPY 012098
-48 VDC from adjunct power
Ground from adjunct power
28 T3
03 R3
2500wire RBP 040596
2-wire analog line circuit pack
Figure 32. This
June 2004