Monitor Download Progress - Avaya CMC1 Installation Manual

Monitor download progress

You can check the progress of a firmware download with this procedure.
1
Type status firmware download and press Enter to display the Status Firmware Download
screen.
status firmware download
Source Board Location: 01C02
Firmware Image File Name: usd1v22r1
Target Board Code: TN464
Schedule Download? _
Start Date/Time: 01/12/2001
Target
Location St
1.01B04
2.01B05
3.______
4. _____
5. _____
6. _____
7. _____
8. _____
9. _____
10. _____
Status: Pending(P) Completed(C) Failed(F) Aborted (A)
If this form is blank, the download has completed; go to
2
Check the
progress of the firmware update:
•
(P)ending
•
(C)ompleted
•
(F)ailed
•
(A)borted
3
Type status firmware download last and press Enter to view the progress of the last completed
firmware update or the entire schedule if it is completed. Notice in the previous screen that the
and
Start
that the
4
If one or more downloads fail, go to
5
If previously you set the
Firmware Download screen to y, then the download procedure is now complete.
If you previously set it to n, then proceed to the next section,
manually remove the firmware image and disable the file system on the source circuit pack.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
Remove Image File After Successful Download? y
Target
Location St
C 11. _____ _
C 12. _____ _
_ 13. _____ _
_ 14. _____ _
_ 15. _____ _
_ 16. _____ _
_ 17. _____ _
_ 18. _____ _
_ 19. _____ _
_ 20. _____ _ 30. _____
(status) field immediately to the right of the
St
times now reflect the actual start and stop times of the download schedule and
Stop
now reflects the vintage that was downloaded.
Firmware Vintage
Remove Image File After Successful Download?
Upgrade Firmware on Programmable Circuit Packs
STATUS FIRMWARE DOWNLOAD
Suffix: GP Firmware Vintage:
13:30 Stop Date/Time: 01/14/2001
Target Target
Location St Location St
21. _____ _ 31. _____
22. _____ _ 32. _____
23. _____ _ 33. _____
24. _____ _ 34. _____
25. _____ _ 35. _____
26. _____ _ 36. _____
27. _____ _ 37. _____
28. _____ _ 38. _____
29. _____ _ 39. _____
_ 40. _____
Step 3.
Target Location
Testing firmware download
Disable file system
Adding or Removing Hardware
Page 1 of 1
8
16:30
Target
Location St
_ 41 _____ _
_ 42 _____ _
_ 43. _____ _
_ 44. _____ _
_ 45. _____ _
_ 46. _____ _
_ 47. _____ _
_ 48. _____ _
_ 49. _____ _
_ 50. _____ _
field to view the
on page 209.
field on the
on page 208, to
207