Install The License File - Avaya CMC1 Installation Manual

Upgrading R9csi/R10csi to Avaya Communication Manager on an Avaya DEFINITY Server CSI
Task table
4
When the system prompts (beeps), insert the original translation (white) card into the processor
circuit pack.
NOTE:
You have 2 minutes to replace the Avaya Communication Manager card with the
translation card. If you miss this window, the system comes up without translations.
Correct this by inserting the original translation card into the processor circuit pack and
use the reset system 3 command at the SAT.
5
When the upgrade is complete, log off the system and log in again as craft.

Install the License File

Pre-installation
1
Type save translation and press Enter.
After the translations have been copied (about 10 minutes), the system returns an error code,
which must be a zero; otherwise, the translations are not copied.
2
Type reset system 3 and press Enter.
Wait until the system has completely reset before continuing.
3
If the system has IP endpoints registered, unplug the Ethernet cable from the TN799 (C-LAN)
circuit pack.
This disconnects (unregisters) all IP endpoints.
4
Type set time and press Enter.
Ensure that the system date and time are set correctly.
Installation (direct connection)
If you have a direct connection between the RFA and the switch:
1
Go to the RFA website, and, following the instructions in the "Deliver to G3r/G3si/G3csi" chapter
of the RFA Job Aid, deliver the License File.
NOTE:
This procedure sends the License File to the switch and installs it.
2
If the system has IP endpoints registered and you unplugged the Ethernet cable from the TN799
(C-LAN) circuit pack, replug the cable.
This re-registers the IP endpoints.
Installation (no direct connection)
If you do not have a direct connection between RFA and the switch:
1
Go to the RFA website, and, following the instructions in the "Deliver to G3r/G3si/G3csi" chapter
of the RFA Job Aid, deliver the License File to your laptop/PC.
2
Open the License Installation Tool (LIT) application at your laptop/PC.
3
Use the LIT instructions to add a switch connection profile to the tool.
190 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004