Wall-Mount The Cabinets - Avaya CMC1 Installation Manual

Wall-Mount the Cabinets

CAUTION:
A fully loaded system weighs 58 lb (26.3 kg). Use lifting precautions. If the doors, power
unit, and circuit packs are removed, the unit weighs only 29 lb (13.1 kg).
Install Plywood Backing onto Wall
The plywood and the hardware to mount the plywood are installer-provided.
NOTE:
The following plywood dimensions account for the extra space needed to install the panels
on each side of the cabinet. The cabinet is 24 in. (0.6 m) wide and each panel is 12 in. (0.3
m) wide.
Single-Cabinet Installation
1
Install a 3/4-in. (2 cm) thick sheet of 2 x 4-ft (0.6 x 1.2 m) plywood horizontally onto the wall. See
Figure 4, Left Panel Used as Mounting Template,
The top of the plywood must be at least 54 in. (137 cm) from the floor.
2 or 3 Vertically Mounted Cabinets
1
Install a 3/4-in. (2 cm) thick sheet of 4 x 8-ft (1.2 x 2.4 m) plywood vertically onto the wall. See
Figure 6, Typical Vertical Multicabinet Installation,
2 Cabinets Vertically Mounted and 1 Cabinet Horizontally Mounted
1
Install a 3/4-in. (2 cm) thick sheet of 4 x 8-ft (1.2 x 2.4 m) plywood vertically onto the wall. See
Figure 6, Typical Vertical Multicabinet Installation,
2
Install a 3/4-in. (2 cm) thick sheet of 2 x 4-ft (0.6 x 1.2 m) sheet of plywood horizontally onto the
wall. Position the plywood to the right of the first sheet, across from Cabinet A.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
Installing and Cabling the Cabinets
Install the System Cabinets
on page 32.
on page 34.
on page 34.
31