Check Spe; Verify Version; Verify System Status - Avaya CMC1 Installation Manual

Upgrading R9csi/R10csi to Avaya Communication Manager on an Avaya DEFINITY Server CSI

Check SPE

1
Type status system 1 and press RETURN.
Check these fields for the corresponding values:
•
Maj/Min alarms =
•
Service State =

Verify version

1
Type list configuration software-version and press RETURN.
The Software Versions screen appears.
2
In the UPDATE FILE section, check the
•
If there is a patch number, then a patch has been applied.
•
If the field is
NOTE:
If you need to restore the system to the old version, you must also download a patch onto
the system.\
3
In the SOFTWARE VERSION section note the current version listed in the
field.
NOTE:
Ensure that the current version is compatible with this software-only upgrade path from
Release 9csi to Avaya Communication Manager.

Verify system status

1
Type status system 1 and press RETURN.
Check these fields for the corresponding values:
•
In the
•
Service State
2
If there are alarms, take the necessary corrective actions (display alarms).
3
Type display errors and press RETURN.
4
Examine the Hardware Error Log and record any Error Code 18 alarm that identifies existing
busyouts. After the upgrade you will restore the busyouts as they were.
5
Execute the following commands to see whether the switch has administration:
— list station
— list trunk-group
— list hunt-group
— list data-module
— list announcements
If any command does not complete successfully, escalate the problem immediately. After the upgrade you
will check the same administration to ensure that the translations are intact.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
0
in service
Update State
, there is no software patch in system memory.
none in memory
section,
SPE ALARMS MAJOR
=
in service
field for a software patch:
and alarms =
MINOR 0
Task table
Memory Resident
187