Install Cabinet A - Wall-Mount - Avaya CMC1 Installation Manual

Installing and Cabling the Cabinets
Install the System Cabinets
Install Cabinet A — Wall-Mount
Figure 4: Left Panel Used as Mounting Template
1
Place the template on the wall ensuring that the top surface is level.
2
Mark two 1/8-in. (0.3 cm) pilot holes in the mounting hole locations.
3
Remove the template from the wall.
4
Drill the two pilot holes.
5
Thread two #12 x 1-in. shoulder screws partially into the holes.
6
Set the cabinet onto the wall and align the slots with the shoulder screws. See
Wall-Mount Installation,
screws securely.
32
on page 33. Slide the cabinet to the left to hold it in place. Tighten the
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
Figure 5, Typical
June 2004