Adding or Removing Hardware
Add CallVisor ASAI
Add Packet Bus Support
1
If packet bus support is not already installed, see
perform the steps.
Add Circuit Packs
1
Determine port assignment of circuit packs to be added.
2
Install the appropriate circuit packs in assigned carrier slot (as required).
EXAMPLE:
The TN744E Call Classifier circuit pack is required for those customers who want greater call
classification capabilities than the TN2182 (Tone-Clock) circuit pack provides.
A vacant port is required on a TN556D ISDN—BRI circuit pack.
Install Cables
1
Install cables from TN464GP to the MDF as required.
Enter Added Translations
1
Administer the required translation data using the forms listed under "Adjunct/Switch
Applications Interface (ASAI)" in Administrator's Guide for Avaya Communication Manager.
Resolve Alarms
1
Examine the alarm log. Resolve any alarms that may exist using Maintenance for Avaya
DEFINITY Server CSI.
Save Translations
1
Type save translation and press Enter. This instructs the system to take all translation
information in memory and write it to the translation cards.
2
Update backup translation cards, if required.
230
3
A
Cabinet (Port
Carrier
Network)
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
Add Packet Bus Support
on page 228 and
07
01
Slot
Port
Number
Number
June 2004