Avaya CMC1 Installation Manual page 237

•
A 10 BaseT Ethernet connection into your LAN for the TN799DP.
•
Two or more valid, unused IP addresses on your network (one for each TN2302AP or TN802/B
and one for each C-LAN) that can be assigned to the IP Media Processor server. You also need the
subnet mask and default gateway.
NOTE:
The customer provides the IP address, subnet mask, and gateway address.
Check your shipment
When your shipment arrives, check the contents (see
1
Inspect the shipping carton for damage before opening it. If the box is damaged, do not open it.
Inform the shipping company, and ask for instructions on filing a claim.
2
If the box is undamaged, check the contents against the packing slip. Check the condition of each
component, and note any damage or shortages on the packing slip. The carton should contain the
items in
ordered.
3
Read and follow any directions inserted into the package by the factory.
Table 58: Required Hardware
Comcode/Code
108312612
848525887
108525528
102631413
1
The adapter has an Amphenol connector on one side and an RJ45 connector on the other
for connecting to the LAN. See
2
You must install a TN799DP to be able to download new firmware to the TN2302AP.
NOTE:
The customer must provide one CAT5 or better cable for each TN2302AP.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
Table 58, Required Hardware,
Description
TN2302AP IP Media Processor
TN2302AP Amphenol Adapter
2
TN799B/C C-LAN circuit pack.
NOTE:
One TN799DP supports
more than one TN2302AP.
ADPTR-259A connector
Figure 91.
Adding or Removing Hardware
Table 58, Required Hardware,
on page 237 for each TN2302AP IP Media Processor
Quantity
1
1
1
1
1
Add IP Solutions
on page 237).
237