Avaya CMC1 Installation Manual page 204

Adding or Removing Hardware
Upgrade Firmware on Programmable Circuit Packs
Table 54: Firmware Download fields and descriptions
Field
Target Board
Code
Suffix
Firmware
Vintage
Schedule
Download
Remove Image
File After
Successful
Download
Start Date/Time
204
Description
Type the circuit pack ID, for
example "TN2501."
Do not type the suffix, such as
"AP", "DP", or "GP".
Examples:
•
For VAL (TN2501AP),
type AP.
•
For C-LAN
(TN799DP), type DP.
•
For DS1 (TN464GP),
type GP.
This is blank. It shows a value
in the Firmware Download
form of a display firmware
download or a status
firmware download.
Type y to schedule the
firmware download for another
time.
Type n to start the firmware
download immediately after
completing the form.
Type y if you want the
procedure to automatically
remove the new firmware
image file [default].
Type n if you do not want the
new firmware image file
removed.
Type the date and time that you
want the firmware download to
begin.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
Notes
Enter the TN code of the target
circuit pack(s).
For a self download, this is the same
as for the source circuit pack.
Once the firmware download begins,
you cannot make any changes to this
form. You can only disable this
schedule using disable firmware
download and then start a new one.
(See Aborting a firmware download
on page 209 for instructions.)
If you answer n(o), then the
and
Date/Time Stop Date/Time
fields disappear. The download
begins as soon as you press Enter.
At the completion of a successful
download, the procedure
automatically removes the new
firmware image file from the source
file system, freeing up the memory
on the source circuit pack. We
recommend using the default setting.
If field is set to n, you must
manually remove the new firmware
image file from the source file
system after the download has
completed. (See Disable file system
on page 208 for instructions.)
Start
2 of 3
June 2004