Add Ip Media Processor - Avaya CMC1 Installation Manual

Adding or Removing Hardware
Add IP Solutions

Add IP Media Processor

Unlike the TN802B IP Interface Assembly, the TN2302AP operates in one mode: Media Processor
(MedPro), which is H.323 compatible.
The following sections describe the process for
•
Preparing for Installation and Upgrade
•
Installing the TN2302AP IP Media Processor
•
Upgrading TN802 IP Trunking to TN2302AP IP Media Processor
•
Upgrading a TN802B IP Interface Assembly to TN2302AP IP Media Processor
For administration, refer to the Administration for Network Connectivity for Avaya Communication
Manager.
Preparing for Installation and Upgrade
In addition to the TN2302AP IP Media Processor, you must also install and administer a C-LAN circuit
pack (TN799DP). For C-LAN administration, refer to Administration for Network Connectivity for Avaya
Communication Manager.
NOTE:
Although the TN2302AP IP Media Processor works with the TN799B C-LAN circuit
pack, you need a TN799DP to download new firmware to the TN2302AP circuit pack.
The TN2302AP IP Media Processor can work in the same configuration with the TN802 IP Trunking and
the TN802B IP Interface Assembly. When figuring the maximum number of circuit packs, you must
include all in your total count.
NOTE:
The TN802 IP Trunking cannot talk directly via Ethernet to the TN2302AP IP Media
Processor.
Each TN2302AP can support between 32 and 64 voice channels, depending on the codecs used.
Check your onsite equipment
Have the following items ready before your shipment arrives:
•
An unoccupied port slot in the carrier for each TN2302AP IP Media Processor
NOTE:
The TN2302AP consumes 16 W of power per slot compared with an average of 15 W per
slot. Do not fill every available slot in a given carrier with them.
•
An additional unoccupied port slot for the TN799DP, if needed. If you have an existing C-LAN
TN799 circuit pack, replace it with the TN799DP or later if it is to be used for IP solutions
registration. Replace it with a TN799DP if you want to be able to download new firmware to the
TN2302AP.
•
A 10 BaseT or 10/100 BaseT Ethernet connection into your local area network (LAN) for the
TN2302AP.
236 Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004