Customizing The Media Server; Starting Terminal Emulation; Inputing Translations - Avaya S8500 Manual

Customizing the media server

For SAT commands, use a Native Configuration Manager, such as Avaya Terminal Emulator or
HyperTerminal. You also can use Avaya Site Administration, part of the Avaya Integrated Management
suite, which you can purchase from Avaya.
Perform these tasks to customize the media server:
•

Starting terminal emulation

•

Inputing translations

•
Resetting media server
•
Adding media gateways
•
Administering the IP server interface
•
Saving translations
Starting terminal emulation
1
On the services laptop, open a VT-100 terminal emulation session.
2
Administer the terminal emulation port settings:
•
•
•
•
•
3
Log into the media server as craft.
Inputing translations
Contact the installation personnel responsible for translation input to download translations.
•
Type
save translations
If the translations are not ready, you may continue with the process, entering minimal translations to
verify connectivity to the port networks.
Installing the Avaya S8500 Media Server with an Avaya G650 Media Gateway
December 2003
NOTE:
You must use Release 1.11 or a later version of Avaya Site Administration, to be able to
administer new features in Release 2.0 of Avaya Communication Manager.
on page 89
on page 89
on page 90
on page 90
on page 93
NOTE:
Avaya Terminal Emulation and HyperTerminal are supported terminal emulation
applications.
9600 baud
No parity
8 data bits
1 stop bit
No flow control
and press Enter to save the translations to the hard drive.
on page 90
Customizing the media server
89