Save Translations; Save Announcements (If Necessary); Upgrade The Software - Avaya CMC1 Installation Manual

Upgrading R9csi/R10csi to Avaya Communication Manager on an Avaya DEFINITY Server CSI

Save translations

1
Type save translation and press RETURN to write all translations from memory to the
translation flashcard (about 10 minutes).
2
Ensure that the save translation command was successful (error code must be zero). If the value
is anything else, the translations were not copied to the flashcard. If the translations are corrupted,
the following error message appears when logging in:
!
Translation corruption detected; call an Avaya distributor immediately.
NOTE:
The save translation command does not run if the translations are corrupt or do not match
(duplicated systems only).

Save announcements (if necessary)

NOTE:
The TN750C and the TN2501AP Integrated Announcement circuit packs store
announcements in nonvolatile memory; saving the announcements to a flashcard is
optional.
1
If the PPN contains a TN750/B Announcement circuit pack, type display announcements and
press RETURN.
2
If administered recorded announcements are listed, type save announcements UUCSS and press
RETURN. For example, 01D03.
The time necessary for this depends upon the length and number of the announcements on the
circuit pack.
NOTE:
For some DEFINITY ECS software versions, type save announcements from UUCSS.
Type help and press RETURN for the complete command syntax.

Upgrade the software

1
Write down the release string EXACTLY as it appears on the orange card.
NOTE:
Note: The entire string is 16 characters, including 4 periods.
2
Insert the media in the processor circuit pack.
3
Type upgrade software <release string> (case sensitive) and press Enter.
This process takes about 10-12 minutes.
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
WARNING:
Task table
189