Install Left And Right Panels - Wall-Mount; Ac Power And Ground - Avaya CMC1 Installation Manual

Installing and Cabling the Cabinets

AC Power and Ground

Install Left and Right Panels — Wall-Mount
Figure 8: Left and Right Panel Installation
Figure notes
1 Left panel
1
Align the cutouts in the panels with the cabinet hinges.
2
Drill a 1/8-inch (0.3 cm) pilot hole into the wall and secure the panels with the #12 x 1-inch
shoulder screws.
AC Power and Ground
CAUTION:
The system requires a dedicated AC power circuit that is not shared with other equipment
and is not controlled by a wall switch. The AC receptacle must not be located under the
Main Distribution Frame and must be easily accessible.
CAUTION:
The latch only removes DC power from the cabinet. Unseating the power supply removes
AC power from the power supply, but not from the cabinet. To remove AC power from the
cabinet, pull the AC power cord from the AC appliance connector on the rear of the
cabinet.
36
1
indmins3 KLC 082002
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
2 Right panel
2
June 2004