Avaya CMC1 Installation Manual page 25

3
Before mounting the cabinets, remove the cabinet doors by opening them and lifting them straight
up and off of the hinge pins.
Figure 1: Equipment Packed with the Compact Modular Cabinet
Figure notes
1 Left panel (also acts as a wall-mount template
and as a floor mount pedestal)
2 Compact modular cabinet
3 Right panel
4 U.S. Robotics external modem (not shipped
with all systems)
5 #12 x 1-inch shoulder screws
6 Processor interface cable (not shipped with
all cabinets)
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
1
qrdmpart KLC 011598
Installing and Cabling the Cabinets
3
2
7
8
9
10
7 AC power cord (NEMA 5-15P or IEC
320)
8 Vertical TDM/LAN bus cable (not
shipped with all systems)
9 Horizontal TDM/LAN bus cable (not
shipped with all systems)
10 14-in. (35.5 cm) 6 AWG (#40)
2
(16 mm
11 Single-point ground block
Unpack and Inspect
4
6
5
11
) ground wire
25