Administering Cdr Parameters - Avaya CMC1 Installation Manual

4
Go to Page 3 and do the following:
a
Enter y in the Reliable Protocol field if you have a CDR application using RSP.
Enter n if the CDR adjunct is connected through a terminal server.
b
If RSP is being used, complete the Packet Resp Timer and Connectivity
Timer fields with some reasonable value that matches the network condition (the
recommended values are 30 and 60 seconds, respectively).
c
Leave the defaults in the other fields.
5
Administer CDR parameters as described in

Administering CDR parameters

You must administer CDR parameters to let the system know that the adjunct is connected through
TCP/IP. For details on all fields on the CDR System Parameters screen, see Administrator's Guide for
Communication Manager, 555-233-506.
1
Type change system-parameters cdr
The CDR System Parameters screen appears.
change system-parameters cdr
Node Number (Local PBX ID):
Primary Output Format: unformatted
Secondary Output Format: unformatted Secondary Output Endpoint: CDR2
Use Enhanced Formats? n
Modified Circuit ID Display? n
Suppress CDR for Ineffective Call Attempts? y
Disconnect Information in Place of FRL? n
Force Entry of Acct Code for Calls Marked on Toll Analysis Form? n
Record Called Vector Directory Number Instead of Group or Member? n
Record Called Agent Login ID Instead of Group or Member? n
Inc Trk Call Splitting? n
Record Non-Call-Assoc TSC? n
Record Call-Assoc TSC? n
Privacy - Digits to Hide: 0
2
In the Primary Output Format field, enter a format specific to the call accounting system,
if necessary. In the example, unformatted is used. If you were sending data directly to a printer,
you would use printer.
3
In the Primary Output Endpoint field, type CDR1.
4
If you use a secondary output device, and that device is also connected through TCP/IP, complete
the Secondary Output Format field. Also, type CDR2 in the Secondary Output
Endpoint field.
5
Press
ENTER
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
June 2004
CDR SYSTEM PARAMETERS
Use ISDN Layouts? n
Record Outgoing Calls Only? y
Digits to Record for Outgoing Calls: dialed
to save your changes.
Adding or Removing Hardware
Install Call detail recording (CDR)
Administering CDR parameters
and press RETURN.
CDR Date Format: month/day
Primary Output Endpoint: CDR1
EIA Device Bit Rate: 9600
Condition Code 'T' for Redirected Calls? n
Remove # From Called Number? n
CDR Call Splitting? y
Attendant Call Recording? y
Interworking Feat-flag? n
Calls to Hunt Group - Record: member-ext
CDR Account Code Length: 4
on page 291.
Page 1 of 1
Intra-switch CDR? n
291