Check Customer Options; Check Link Status; Power Up Definity Audix System; Resolve Alarms - Avaya CMC1 Installation Manual

Upgrading R6csi/R7csi/R8csi to Avaya Communication Manager on an Avaya DEFINITY Server CSI
Task Table
16
Click on the Continue Registration button at the bottom of the page.
ART begins automatically registering the product and displays progress messages to indicate the
current status.
CAUTION:
DO NOT exit your browser or click on the Refresh, Back, Stop, or Home buttons while
ART displays these progress messages.
If you have to abort your registration, click on the Abort Session button that appears with
one of the progress messages.
If the preceding steps have been completed successfully, ART displays the DEFINITY Upgrade
Registration Report.
17
Review the information displayed in the report.
If any of the data are incorrect, contact the DBA Group (1-800-248-1234, selecting prompt, 2,
prompt 6, then prompt 2) immediately for assistance.
18
Save the DEFINITY Upgrade Registration Report in a file for future reference or print the report
and keep the copy.

Check Customer Options

1
Type display system-parameters customer-options and press Enter.
2
Ensure that the
3
If the customer was using Supplementary Services Protocol b or d on an ISDN-PRI trunk group
before the upgrade, go to screen 7, QSIG Optional Features, and ensure that the
Setup

Check Link Status

1
Type display communication-interface links and press Enter.
2
Type status link number and press Enter. Repeat this step for each link.
3
Check that DS1 trunks and BRI phones are functioning normally.
4
Refer to Maintenance for Avaya DEFINITY Server CSI to test or restore the out-of-service links.

Power Up DEFINITY AUDIX System

1
To power up the AUDIX assembly, refer to

Resolve Alarms

1
Type display alarms and press Enter to examine the alarm log. Resolve any alarms using
Maintenance for Avaya DEFINITY Server CSI.
174
field is
G3 version:
field is .
y
Installation, Upgrades and Additions for Avaya CMC1 Media Gateways
.
V11
DEFINITY AUDIX Power Procedures
Basic Call
on page 176.
June 2004